ReportMagic

[LogicMonitor.InstanceList:]

Produces a list of list of instances of a given DataSource on a given Device.

Compatibility

The macro can be used in all input document types and in Report Studio.

Usage

When specifying deviceGroup(s) and dataSource(s) / dataSourceName(s), only the property type 'Spec' is supported. Spec is defined as the Device DataSource Instance's Device ID, it's DataSource ID, and it's ID.

Updates

One year ago · July 2025

Fixed issue where the macro would not work in Normal Mode. Normal Mode properties 'ResourceDataSourceId', 'ResourceId', and 'ResourceDisplayName' are now used instead of 'DeviceDataSourceId', 'DeviceId', and 'DeviceDisplayName'. You may still request those properties, but in the output JObject, they will use the new names.

Parameters (122)

Grouped View

Behaviour (3)11 additional

Parameter	Type	Presence	Purpose	Options	Default
maxAttempts	Int32	Optional	The maximum number of attempts when requesting data via the LogicMonitor API.	From 1 to 2147483647	N/A
recurseDeviceGroups	Boolean	Optional	Whether to recurse Device Groups when the deviceGroups parameter is specified.	true false	true
waitDuringUpgrades	Boolean	Optional	Whether to wait during LogicMonitor upgrades (i.e. execution essentially pauses).	true false	N/A

Additional (11)

Parameter	Type	Presence	Purpose	Options	Default
calculate	String	Optional	Post processing formula. Use {value} to substitute the macro's output into the formula as text, e.g. {value}/1024, or the bare word value to use the output itself, e.g. jPath(value, 'id') to read a property from an object. If the result is fractional it is shown to two decimal places unless you also set format, e.g. format=G to show it in full; a value kept by storeAs always retains its full precision.	N/A	N/A
desiredExecutionResult	List<ExecutionResult>	Optional	If specified, asserts the expected execution result of the macro. Accepts a single value or a semicolon-separated list of acceptable values (e.g. 'Success;Warning'). The macro executes normally; if the actual result matches any of the desired values, the result is converted to Success. If the actual result does not match, the result is converted to MacroError with a descriptive message. This is primarily used for testing and diagnostic purposes. Valid values are: 'Unknown', 'Success', 'MacroError', 'WorkerStopped', 'Running', 'Warning', 'NeverRun', 'Cancelled', 'Pending', 'Paused', 'SystemError', 'Deferred' and 'Stopped'.	Cancelled Deferred MacroError NeverRun Paused Pending Running Stopped Success SystemError Warning WorkerStopped	N/A
errorOnOverflow	Boolean	Optional	Should NCalc expression evaluation throw error on Overflow	true false	true
expectedType	String	Optional	If specified, asserts the expected output type of the macro result. The macro executes normally; if the actual type does not match, a macro error is generated. Requires 'storeAs', 'storeAsHidden', or 'storeFormattedValueAs' to be set for typed validation. Valid types include CLR names (e.g. Int32, Int64, Single, Double, Boolean, String, JArray, JObject) and C# keyword aliases (e.g. int, long, float, double, bool, string, uint, ulong, short, ushort, byte, sbyte, decimal, char, object). The special value 'Number' matches any numeric type.	N/A	N/A
expectedValue	String	Optional	If specified, asserts the expected output value of the macro result. The macro executes normally; if the actual value does not match, a macro error is generated. When 'storeAs' or 'storeAsHidden' is set, the stored variable value is compared. Otherwise, the document output text is compared.	N/A	N/A
hidden	Boolean	Optional	Whether to hide the macro output.	true false	false
if	String	Optional	The condition that must be true in order for the macro to be executed/evaluated. Must either evaluate to true or false, for example: "3+5=8" or "contains('abcd', 'z')".	N/A	true
mode	MacroMode	Optional	The mode in which variables are stored. In legacy mode (default for Schedules), the variable created is a string and formatted. In normal mode (default for Report Studio), the output variable is stored as a strongly-typed object, e.g. an Int32 or a JArray etc., rather than a formatted string.	Legacy Normal	Legacy
obfuscation	ObfuscationType	Optional	Obfuscation type. Use obfuscation to write reports where sensitive data is hidden. When used, ReportMagic guarantees that the same input string will map to the same output string for the whole of the report (but the next time the report runs, it will most likely map to a different value). If you use obfuscation, the property in your macro will not show up and instead, you will see a fake item of the obfuscation type chosen.	None UkTown DeviceName Company IpAddress PrivateIpAddress	None
redact	Boolean	Optional	Whether substituted variables are hidden from macro results (and the word 'REDACTED' will appear in progress screens and elsewhere in the web UI).	true false	false
warning	String	Optional	If specified, adds a warning message for this macro. This is processed as an NCalc, and the warning message will ALWAYS be present and will be the value of the evaluated NCalc expression.	N/A	N/A

Colours (21)

Parameter	Type	Presence	Purpose	Options	Default
colorTableCell	Boolean	Optional	Whether to color table cells if thresholds are breached, rather than color the text.	true false	true
criticalFontBackgroundColor	Color	Optional	The critical font background color to use. If omitted, no change is made.	A named color or an HTML-encoded color .Note that 'transparent' is a valid color that you can use in any macro parameter that expects a color.	N/A
criticalFontColor	Color	Optional	The critical font color to use. If omitted, no change is made.	A named color or an HTML-encoded color .Note that 'transparent' is a valid color that you can use in any macro parameter that expects a color.	N/A
criticalTableCellBackgroundColor	Color	Optional	The critical table cell background color to use. If omitted, no change is made.	A named color or an HTML-encoded color .Note that 'transparent' is a valid color that you can use in any macro parameter that expects a color.	N/A
errorFontBackgroundColor	Color	Optional	The error font background color to use. If omitted, no change is made.	A named color or an HTML-encoded color .Note that 'transparent' is a valid color that you can use in any macro parameter that expects a color.	N/A
errorFontColor	Color	Optional	The error font color to use. If omitted, no change is made.	A named color or an HTML-encoded color .Note that 'transparent' is a valid color that you can use in any macro parameter that expects a color.	N/A
errorTableCellBackgroundColor	Color	Optional	The error table cell background color to use. If omitted, no change is made.	A named color or an HTML-encoded color .Note that 'transparent' is a valid color that you can use in any macro parameter that expects a color.	N/A
fatalFontBackgroundColor	Color	Optional	The fatal font background color to use. If omitted, no change is made.	A named color or an HTML-encoded color .Note that 'transparent' is a valid color that you can use in any macro parameter that expects a color.	N/A
fatalFontColor	Color	Optional	The fatal font color to use. If omitted, no change is made.	A named color or an HTML-encoded color .Note that 'transparent' is a valid color that you can use in any macro parameter that expects a color.	N/A
fatalTableCellBackgroundColor	Color	Optional	The fatal table cell background color to use. If omitted, no change is made.	A named color or an HTML-encoded color .Note that 'transparent' is a valid color that you can use in any macro parameter that expects a color.	N/A
fontBackgroundColor	Color	Optional	The font background color to use.	A named color or an HTML-encoded color .Note that 'transparent' is a valid color that you can use in any macro parameter that expects a color.	N/A
fontColor	Color	Optional	The font color to use.	A named color or an HTML-encoded color .Note that 'transparent' is a valid color that you can use in any macro parameter that expects a color.	N/A
infoFontBackgroundColor	Color	Optional	The info font background color to use. If omitted, no change is made.	A named color or an HTML-encoded color .Note that 'transparent' is a valid color that you can use in any macro parameter that expects a color.	N/A
infoFontColor	Color	Optional	The info font color to use. If omitted, no change is made.	A named color or an HTML-encoded color .Note that 'transparent' is a valid color that you can use in any macro parameter that expects a color.	N/A
infoTableCellBackgroundColor	Color	Optional	The info table cell background color to use. If omitted, no change is made.	A named color or an HTML-encoded color .Note that 'transparent' is a valid color that you can use in any macro parameter that expects a color.	N/A
normalFontBackgroundColor	Color	Optional	The normal font background color to use. If omitted, no change is made.	A named color or an HTML-encoded color .Note that 'transparent' is a valid color that you can use in any macro parameter that expects a color.	N/A
normalFontColor	Color	Optional	The normal font color to use. If omitted, no change is made.	A named color or an HTML-encoded color .Note that 'transparent' is a valid color that you can use in any macro parameter that expects a color.	N/A
normalTableCellBackgroundColor	Color	Optional	The normal table cell background color to use. If omitted, no change is made.	A named color or an HTML-encoded color .Note that 'transparent' is a valid color that you can use in any macro parameter that expects a color.	N/A
warningFontBackgroundColor	Color	Optional	The warning font background color to use. If omitted, no change is made.	A named color or an HTML-encoded color .Note that 'transparent' is a valid color that you can use in any macro parameter that expects a color.	N/A
warningFontColor	Color	Optional	The warning font color to use. If omitted, no change is made.	A named color or an HTML-encoded color .Note that 'transparent' is a valid color that you can use in any macro parameter that expects a color.	N/A
warningTableCellBackgroundColor	Color	Optional	The warning table cell background color to use. If omitted, no change is made.	A named color or an HTML-encoded color .Note that 'transparent' is a valid color that you can use in any macro parameter that expects a color.	N/A

Formatting (15)

Parameter	Type	Presence	Purpose	Options	Default
criticalFontBold	Boolean	Optional	Change the critical font weight (true=strong, false=normal). If omitted, no change is made.	true false	N/A
criticalFontSize	Double	Optional	Change the critical font size in points. If omitted, no change is made.	From 2 to 200	N/A
errorFontBold	Boolean	Optional	Change the error font weight (true=strong, false=normal). If omitted, no change is made.	true false	N/A
errorFontSize	Double	Optional	Change the error font size in points. If omitted, no change is made.	From 2 to 200	N/A
fatalFontBold	Boolean	Optional	Change the fatal font weight (true=strong, false=normal). If omitted, no change is made.	true false	N/A
fatalFontSize	Double	Optional	Change the fatal font size in points. If omitted, no change is made.	From 2 to 200	N/A
fontBold	Boolean	Optional	Change the font weight (true=strong, false=normal). If omitted, no change is made.	true false	N/A
fontSize	Double	Optional	Change the font size in points. If omitted, no change is made.	From 2 to 200	N/A
format	String	Optional	The formatting to use for numbers. You can also specify 'format=string' to force numbers to be treated as strings. For dates, C# date formats are supported, plus two special values (in any casing): 'format=dayOfWeek' for the day of the week as a number (Sunday = 0; use 'format=dddd' for the day name) and 'format=epoch' for the number of seconds since 1970-01-01 UTC.	N/A	N/A
infoFontBold	Boolean	Optional	Change the info font weight (true=strong, false=normal). If omitted, no change is made.	true false	N/A
infoFontSize	Double	Optional	Change the info font size in points. If omitted, no change is made.	From 2 to 200	N/A
normalFontBold	Boolean	Optional	Change the normal font weight (true=strong, false=normal). If omitted, no change is made.	true false	N/A
normalFontSize	Double	Optional	Change the normal font size in points. If omitted, no change is made.	From 2 to 200	N/A
warningFontBold	Boolean	Optional	Change the warning font weight (true=strong, false=normal). If omitted, no change is made.	true false	N/A
warningFontSize	Double	Optional	Change the warning font size in points. If omitted, no change is made.	From 2 to 200	N/A

Conditional Formatting (35)

Parameter	Type	Presence	Purpose	Options	Default
criticalEq	String	Optional	The macro is considered 'critical' if the output is equal to this value.	N/A	N/A
criticalGe	String	Optional	The macro is considered 'critical' if the output is greater than or equal to this value.	N/A	N/A
criticalGt	String	Optional	The macro is considered 'critical' if the output is greater than this value.	N/A	N/A
criticalIf	String	Optional	The macro is considered 'critical' if the expression evaluates to true. Use 'value' as the macro output in the expression.	N/A	N/A
criticalLe	String	Optional	The macro is considered 'critical' if the output is less than or equal to this value.	N/A	N/A
criticalLt	String	Optional	The macro is considered 'critical' if the output is less than this value.	N/A	N/A
criticalNe	String	Optional	The macro is considered 'critical' if the output is not equal to this value.	N/A	N/A
errorEq	String	Optional	The macro is considered 'error' if the output is equal to this value.	N/A	N/A
errorGe	String	Optional	The macro is considered 'error' if the output is greater than or equal to this value.	N/A	N/A
errorGt	String	Optional	The macro is considered 'error' if the output is greater than this value.	N/A	N/A
errorIf	String	Optional	The macro is considered 'error' if the expression evaluates to true. Use 'value' as the macro output in the expression.	N/A	N/A
errorLe	String	Optional	The macro is considered 'error' if the output is less than or equal to this value.	N/A	N/A
errorLt	String	Optional	The macro is considered 'error' if the output is less than this value.	N/A	N/A
errorNe	String	Optional	The macro is considered 'error' if the output is not equal to this value.	N/A	N/A
fatalEq	String	Optional	The macro is considered 'fatal' if the output is equal to this value.	N/A	N/A
fatalGe	String	Optional	The macro is considered 'fatal' if the output is greater than or equal to this value.	N/A	N/A
fatalGt	String	Optional	The macro is considered 'fatal' if the output is greater than this value.	N/A	N/A
fatalIf	String	Optional	The macro is considered 'fatal' if the expression evaluates to true. Use 'value' as the macro output in the expression.	N/A	N/A
fatalLe	String	Optional	The macro is considered 'fatal' if the output is less than or equal to this value.	N/A	N/A
fatalLt	String	Optional	The macro is considered 'fatal' if the output is less than this value.	N/A	N/A
fatalNe	String	Optional	The macro is considered 'fatal' if the output is not equal to this value.	N/A	N/A
infoEq	String	Optional	The macro is considered 'info' if the output is equal to this value.	N/A	N/A
infoGe	String	Optional	The macro is considered 'info' if the output is greater than or equal to this value.	N/A	N/A
infoGt	String	Optional	The macro is considered 'info' if the output is greater than this value.	N/A	N/A
infoIf	String	Optional	The macro is considered 'info' if the expression evaluates to true. Use 'value' as the macro output in the expression.	N/A	N/A
infoLe	String	Optional	The macro is considered 'info' if the output is less than or equal to this value.	N/A	N/A
infoLt	String	Optional	The macro is considered 'info' if the output is less than this value.	N/A	N/A
infoNe	String	Optional	The macro is considered 'info' if the output is not equal to this value.	N/A	N/A
warningEq	String	Optional	The macro is considered 'warning' if the output is equal to this value.	N/A	N/A
warningGe	String	Optional	The macro is considered 'warning' if the output is greater than or equal to this value.	N/A	N/A
warningGt	String	Optional	The macro is considered 'warning' if the output is greater than this value.	N/A	N/A
warningIf	String	Optional	The macro is considered 'warning' if the expression evaluates to true. Use 'value' as the macro output in the expression.	N/A	N/A
warningLe	String	Optional	The macro is considered 'warning' if the output is less than or equal to this value.	N/A	N/A
warningLt	String	Optional	The macro is considered 'warning' if the output is less than this value.	N/A	N/A
warningNe	String	Optional	The macro is considered 'warning' if the output is not equal to this value.	N/A	N/A

Filtering & Sorting (1)

Parameter	Type	Presence	Purpose	Options	Default
selectDistinct	Boolean	Optional	Specify true to exclude repeated entries	true false	true

Output (1)7 additional

Parameter	Type	Presence	Purpose	Options	Default
listDelimiter	Char	Optional	In Legacy Mode, the delimiter to use between multiple items in the output.	N/A	;

Additional (7)

Parameter	Type	Presence	Purpose	Options	Default
failureText	String	Optional	The text to display should the macro fail to execute. Note that a poorly-specified macro (e.g. omitting mandatory parameters) will still result in an error message.	N/A	N/A
failureVariable	String	Optional	The name of a variable to create should the macro fail to execute. The variable will be a text variable, and will contain either the failure text (only if the failureText parameter is set), otherwise it will contain the exception / failure message.	N/A	N/A
outputListsAsJarray Normal mode	Boolean	Optional	Any macros that output lists can optionally (in Normal mode) output a jArray instead.	true false	true
storeAs	String	Optional	The variable to store the result as. If the variable name ends 'Json' (any casing) its value is wrapped in json tags. That marks the value as JSON so it can be passed straight into a parameter that expects json content, and the RMScript editor also displays it with JSON highlighting. When several variables are stored at once each one is judged by its own name.	N/A	N/A
storeAsHidden	String	Optional	The variable to store the result as, while hiding the output. Equivalent to 'storeAs=ThisValue, hidden=true'.	N/A	N/A
storeAsVariableDelimiter	Char	Optional	The delimiter used by storeAs to split a TEXT value, when there are multiple stored variables. For example, in this macro, we indicate that the value to be stored should be split by the asterisk when being stored: [String:value=abcd, storeAs=var1;var2;var3;var4, storeAsVariableDelimiter=]. If splitting on this delimiter does not produce one value per variable, the '^' character is tried instead; that applies whatever this parameter is set to, and is what allows a single variable to hold a value containing a ';'. Note this delimiter is only used for a TEXT value. A list or a JSON array is instead shared out one element per variable, and a JSON object by its property values in order, so storing jObject('a',1,'b',2) as two variables gives 1 and 2. Any other type cannot be split across several variables at all.	N/A	;
storeFormattedValueAs	String	Optional	The name of the STRING variable to store the result as and output (both will use the same format) into the report. Note that if you also use 'storeAsHidden' in the same macro, you should not expect the output to be hidden, as this parameter overrides that. As with 'storeAs', a name ending 'Json' has its value wrapped in json tags.	N/A	N/A

General (14)2 additional

Parameter	Type	Presence	Purpose	Options	Default
dataSource	List<String>	Conditional	The DataSource name or names. Either this or dataSourceId must be specified.	N/A	N/A
dataSourceIds	List<Int32>	Conditional	The DataSource Id(s). Either this or dataSourceNames must be specified.	N/A	N/A
deviceGroups	List<String>	Conditional	The Device Group (or semicolon-separated list of Device Groups). Either this parameter, deviceIds or the devices parameter must be specified. Use "/" or no value in the deviceGroups parameter to reference the root folder.	N/A	N/A
deviceIds	List<Int32>	Conditional	The Device (or semicolon-separated list of Devices). Either this parameter, devices or the deviceGroups parameter must be specified.	N/A	N/A
devices	List<String>	Conditional	The Device (or semicolon-separated list of Devices). Either this parameter, deviceIds or the deviceGroups parameter must be specified.	N/A	N/A
propertyRegexMatchesPattern	Regex	Conditional	Used with propertyRegexMatchesProperty to specify the instance-level pattern that must match for that property.	N/A	N/A
propertyRegexMatchesProperty	String	Conditional	Used with propertyRegexMatchesPattern to specify the instance-level property.	N/A	N/A
aliasRegexMatches	Regex	Optional	Only include instances where the alias matches a regular expression.	N/A	N/A
connectionName	String	Optional	The name of the LogicMonitor Connection.	N/A	N/A
dataSourceInstanceAlias	String	Optional	Filter by alias (only applies when property=alias is used). Multiple values can be used, separated by a semi-colon.	N/A	N/A
dataSourceInstanceGroupName	String	Optional	Filter by DataSource instance group name(s). Multiple values can be used, separated by a semi-colon.	N/A	N/A
dataSourceInstanceName	String	Optional	Acts as a filter on the returned instance name(s). Multiple values can be used, separated by a semi-colon.	N/A	N/A
descriptionRegexMatches	Regex	Optional	Only include instances where the description matches a regular expression.	N/A	N/A
property	DataSourceInstanceProperty	Optional	The property to insert. The 'Spec' property is not supported in Normal Mode. You can obtain the 'ResourceId','DataSourceId' and 'ResourceDataSourceId' properties separately.	Name None GroupId DisplayName Alias LockDescription DeviceId DataSourceId DeviceDataSourceId WildValue WildValue2 DisableAlerting StopMonitoring AlertStatus SdtStatus AlertDisableStatus SdtAt Id AllAsJson Description GroupName Type DeviceDisplayName Spec AllAsJObject ResourceDataSourceId ResourceDisplayName ResourceId AlertDisabledOn AlertStatusPriority IsUNCInstance CollectorId CustomProperties SystemProperties AutoProperties	Name

Additional (2)

Parameter	Type	Presence	Purpose	Options	Default
comment	String	Optional	Add a comment to make your document template more readable. The comment is discarded in the output document.	N/A	N/A
singleValueList Normal mode	Boolean	Optional	In Normal Mode and for macros that output JArrays only, whether to convert a JArray of single-property jObjects into a flat JArray of values.	true false	false

Deprecated (12)

Parameter	Type	Preferred Parameter	Purpose	Options	Default
dataSourceId	List<Int32>	dataSourceIds	The DataSource Id(s). Either this or dataSourceNames must be specified.	N/A	N/A
dataSourceName	List<String>	dataSource	The DataSource name or names. Either this or dataSourceId must be specified.	N/A	N/A
dataSourceNames	List<String>	dataSource	The DataSource name or names. Either this or dataSourceId must be specified.	N/A	N/A
dataSources	List<String>	dataSource	The DataSource name or names. Either this or dataSourceId must be specified.	N/A	N/A
device	List<String>	devices	The Device (or semicolon-separated list of Devices). Either this parameter, deviceIds or the deviceGroups parameter must be specified.	N/A	N/A
deviceGroup	List<String>	deviceGroups	The Device Group (or semicolon-separated list of Device Groups). Either this parameter, deviceIds or the devices parameter must be specified. Use "/" or no value in the deviceGroups parameter to reference the root folder.	N/A	N/A
deviceId	List<Int32>	deviceIds	The Device (or semicolon-separated list of Devices). Either this parameter, devices or the deviceGroups parameter must be specified.	N/A	N/A
group	List<String>	deviceGroups	The Device Group (or semicolon-separated list of Device Groups). Either this parameter, deviceIds or the devices parameter must be specified. Use "/" or no value in the deviceGroups parameter to reference the root folder.	N/A	N/A
groups	List<String>	deviceGroups	The Device Group (or semicolon-separated list of Device Groups). Either this parameter, deviceIds or the devices parameter must be specified. Use "/" or no value in the deviceGroups parameter to reference the root folder.	N/A	N/A
host	List<String>	devices	The Device (or semicolon-separated list of Devices). Either this parameter, deviceIds or the deviceGroups parameter must be specified.	N/A	N/A
hosts	List<String>	devices	The Device (or semicolon-separated list of Devices). Either this parameter, deviceIds or the deviceGroups parameter must be specified.	N/A	N/A
delimiter	Char	listDelimiter	In Legacy Mode, the delimiter to use between multiple items in the output.	N/A	;

Examples (11)

Example 1

[LogicMonitor.InstanceList: device=dev.panoramicdata.com, dataSource=WinCoreCount]

Example 2

[LogicMonitor.InstanceList: device=dev.panoramicdata.com, dataSource=WinCoreCount, property=DisplayName, storeAs=WinCoreInstancesDescriptions]

Example 3

[LogicMonitor.InstanceList: device=dev.panoramicdata.com, dataSource=WinPhysicalDrive-, property=Name, storeAs=PhysicalDiskInstancesNames, selectDistinct=true]

Example 4

[LogicMonitor.InstanceList: device=dev.panoramicdata.com, dataSource=WinPhysicalDrive-, property=Name, dataSourceInstanceName=C:]

Example 5

[LogicMonitor.InstanceList: device=dev.panoramicdata.com, dataSource=WinIf-, property=Alias, dataSourceInstanceAlias=HP]

Example 6

[LogicMonitor.InstanceList: device=dev.panoramicdata.com;test.panoramicdata.com, dataSource=WinPhysicalDrive-, property=DisplayName]

Example 7

[LogicMonitor.InstanceList: deviceGroups=PDL - Panoramic Data/Datacenter, dataSource=WinIf-, property=Spec, selectDistinct=true]

Example 8

[LogicMonitor.InstanceList: deviceGroups=PDL - Panoramic Data/Datacenter;PDL - Panoramic Data/Datacenter/Private/Servers, dataSource=WinPhysicalDrive-, property=Spec, selectDistinct=true]

Example 9

[LogicMonitor.InstanceList: device=pdl-fw-01, dataSourceInstanceGroupName=@default, dataSource=snmp64_If-]

Example 10

Match where the alias contains "Multifunction"

[LogicMonitor.InstanceList: device=dev.panoramicdata.com, dataSource=WinIf-, property=Alias, dataSourceInstanceAlias=HP, aliasRegexMatches=(.+Multifunction.+)]

Example 11

Match where the alias starts with "HP NC" followed by 3 digits

[LogicMonitor.InstanceList: device=dev.panoramicdata.com, dataSource=WinIf-, property=Alias, dataSourceInstanceAlias=HP, aliasRegexMatches=(HP NC\d3i.+)]

Compatibility

Usage

Updates

Examples (11)

Example 1

Example 2

Example 3

Example 4

Example 5

Example 6

Example 7

Example 8

Example 9

Example 10

Example 11

Search

Reconnection

Reconnection

Reconnection